Samsung 03 Alignment & Adjustment free download

File name 03_Alignment & Adjustment.pdf

Alignment and Adjustments 2. Alignment and Adjustments 2-1 Service Mode 2-1-1 SERVICE MODE Entry Method For the General Transmitter 1. Turn the power off and set to stand-by mode. 2. Press the buttons of the transmitter in this order; INFO-MENU-MUTE-POWER ON to turn the set on. 3. The set turns on and enters service mode. For the Factory Transmitter 1. Turn the power on. 2. Press the buttons of the transmitter in this order : INFO-Factory. 3. The set enters service mode. * If you fail to enter service mode, repeat steps 1 and 2 above. 2-1-2 Initial DISPLAY State of SERVICE MODE 2-1-2(A) OSD DISPLAY Factory Mode Current Input Mode Indicates selected input mode 01. Picture Improvement Picture Adjustment 02. Initial Setting Setting the Initial Values 03. PIP/TTX/Test Pattern Setting the Special Features 04. Option-1 Options-1 : Options of the Product Particulars 05. Option-2 Options-2 : Options of the PDP Properties 06. Reset Initializing after saving the adjustments Software Version Information Release : 2004-06-10-10:15 Version : T-NPL42PEA-1108 2-1-2(B) Button Operations in SERVICE MODE Menu Displays all menus UP/DOWN Cursor move to select items LEFT/RIGHT Enable to increase and decrease the data of the selected items (ENTER) Confirm your choice(Store OR Enter) SOURCE Change input source While in Tuner mode, the direct access buttons can be used to select and change channels. Samsung Electronics 2-1 Alignment and Adjustments 2-2 WHITE Balance Coordinates 2-2-1 PS-42P4H White Balance Adjustment 1. W/B Adjustment is required for the following six modes : DVI ' Component(1080i) ' Component(720p) ' PC ' VIDEO (Video port) ' VIDEO (Graphic port) 2. Adjustment Method (Signal equipment : MSPG-925LTH, Measurement equipment : CA210) MSPG-925LTH Equipment that outputs analog and digital signals simultaneously (Analog / Digital signal output / TV signal output (S-Video included) / HDTV signal output) -. Digital Serial : TMDS (DVI24, SiI160) + DVI-I (Analog, Digital) -. Monitor Signal (Analog): R, G, B, HS, VS, CS -. TV Signal (CVBS) : NTSC M, NTSC J (7.5 IRE On/Off) (BNC or RCA), PAL B, D, G, H, I, PAL M, Nc -. D-TV Signal (1080i, 7